Party Table Backdrops & Backgrounds

PARTY TABLE BACKDROPS AND BACKGROUNDS

Today is a roundup of inspiration for party table backdrops and backgrounds.  These tablescapes should give you some ideas for setting up your dessert or food table at your next party. Let’s get started with this adorable ladybug party.  How creative are those honeycomb balls with added punched black paper circles made into the ladybug head and antennae and the ladybug spots.  So cute!  Ladybugs are a perfect theme for a summer party too!

This background is a giant printed graphic poster just added to an even larger fabric covered board. I love this idea, but the printing cost may get a little pricey.  Another alternative that would cost less is the fabric covered board below with a small framed birthday sign or letter banner centered in the middle.

I love that they used part of the green vinyl tablecloth as a valance topper at the top of the fabric background. The polka dot balloons in a small bouquet create a balanced height at each side too.

Confetti balloons are all the rage- and just two flanking the back sides of each end of the table create a stunning background with height!  The added floor length balloon tissue tassel garland add a finishing touch.

This bride has simple giant white balloons arranged in an arch with added greenery and florals for a beautiful, yet neutral, photo background.

Paper fans on the wall are always an easy go-to for a party table background- but they can be dressed up with custom cut designs available in The Party Fetti Shop.

A mix of all sizes of pinwheels are so whimsical and super easy to create a party table background.  So easy to create this random arrangement on the wall. Create your own with pinwheels from Pinwheel Pretties.

Last are two entirely simple diy backdrops made with crepe paper streamers.  The added tissue fan above, for the sun, is adorable.  The rainbow streamer backdrop below is so easy too! Seven bright strips of crepe streamer taped to the back of the wall and simply run across the top and front of a basic white tablecloth- would take five minutes to make and so inexpensive.  The top could feature small white balloons or use my cloud tutorial from a previous blog post for  making your own cloud topper.

Thanks for stopping by the blog today.  I hope these party backdrops have inspired you to start planning your next party!

Remember to stop by any of my shops for all your diy crafting supplies, party decorations and favors and wedding decor.

THE PARTY FETTI SHOP

PINWHEEL PRETTIES

I DO WEDDING & BRIDAL DESIGNS

READY SET CRAFT KITS

ONCE UPON A HOME DESIGNS

How To Create A Party Backdrop

HOW TO CREATE A PARTY BACKDROP WITH PINWHEELS & PAPER FANS

Today I am going to show you three easy ways to create a party table backdrop using paper or tissue hanging fans or what many like to call “pinwheels”. . . which I will correctly define right now-

These spinning fun designs above are actually PINWHEELS

And these circular paper or tissue designs are actually HANGING FANS

I just had to clear that up. . . whatever you call them is fine but the one question I am asked often is what do you do with them or how do you display paper and tissue fans at a party? Today I am going to offer some instruction and inspire you to create a party table background or a photo backdrop with your hanging fans.

Oh look- here are some pinwheels and hanging fans displayed together!

While there are plenty of DIY tutorials on how to make these hanging fans –

There is not much available instruction on social media explaining how to actually get them on the wall to display.

There are a few different ways to put them up that are super easy.  So grab a cup of coffee- or tea – or wine and let’s get started!

The easiest way to display them is to simply hang them- they are technically called, “hanging fans” so this is the most common way to display them. You can hang them directly from the ceiling or you can use a curtain rod or tension rod to hang them.  Generally just using tacks and pinning them to the wall is easiest way to get them stationary on the wall- if you don’t need them floating out from the wall.   However, if you prefer not to add holes directly to your wall you can use the Command pee-able strips.  If using the Command strips, your fans will probably not be reusable though, as they will most likely be damaged and ripped when you pull them off the wall- so keep that in mind.   I prefer the method shown below of using a freestanding background board.

There are lots of different materials to use- if you are only doing a very small area, a large cardboard or white foam board backing would be okay, as long as you are not adding too many fans like this one below-

When using some type of board backing, weather it be wood, a sheet of drywall, or foam board- it is the easiest way to put your display together because you can actually assemble it on a table or floor.  You can either use sewing pins or flat tacks if using cardboard or foam board but if you are using wood or a heavier material, you’ll need to use a glue gun and hot glue your fans.  See how this larger wood backed fan display was all laid out on the floor and all the fans were hot glued down before putting it up-

And here it is installed-

I definitely recommend a heavy wood or drywall board if you are creating a large display background like this or your are going to layer it with many fans.

However, if your area is small enough, you can also use a large picture frame

You can see the corners of the black picture frame in the set up above.   You can even go to your local thrift store and buy the largest picture or painting, no mater how ugly it is, as long as it is large and framed and just cover it with fabric by wrapping it around the front and stapling the fabric to the back or spray paint the whole thing one color- pick a color that matches your dominate color of fans. If it has glass- you can either paint right over the glass, with a glass paint or remove the glass and replace it with cardboard or foam board- and foam board comes in an array of colors, so you could go with a color that matches your party color scheme.

This is another way to display fans- add them to long wood stick stands or floor poles, shown here in this jewelry company promotional product display, and simply stand your fans up behind or on the back of your party table-

So there you have it- the how to on getting your fans up and displayed at your next party!

If you are not into making your own hanging fans or need me to help you with a party backdrop, feel free to browse all my shops by clicking the links below-

Thanks for stopping by today!

DIY PARTY DECORATIONS – FLOWER BALLOONS

FLOWER BALLOONS DIY PROJECT
FlowerBalloon

These daisy flower balloons are so easy to make.  They would look stunning at a little girl’s birthday party or at a baby shower! Great as a retail window display too!  Make them in different colors too! No helium needed! Read on for the easy DIY –

You’ll need either 7″ or 12″ balloons in your colors of choice.  I suggest buying at least two different colors, so you have a contrasting color for your center balloon.  The larger balloons will create a puffier style of flower, rather than the daisy flowers shown here, which are made with the smaller 7″ balloons.

These are fairly easy to assemble.   Let’s get started with the step-by-step directions:

Step 1: Cut two circle templates from chipboard or a cardboard box will work too.  Cut one circle at approximately 6″ across and the other circle at 4″ across.  I find that using a bowl or tupperware container and flipping it over on your cardboard or chipboard and tracing around the edge makes it so easy to make a perfect circle!

Step 2: Blow up five balloons (for the flower petals), make sure they fit through the 6″ hole circle template. This helps to make sure all your balloons are the same size and your balloon flower petals will look consistent.  Easy trick! Next, blow up your center balloons (for creating the flower center), making sure they fit through the smaller 4″ circle template.  A balloon hand pump inflator is great for blowing up balloons and can make it go much faster.

Step 3: Tie two or your inflated balloons together. Create two sets of these double balloons as pictured above.

Step 4: Tie a third inflated balloon together, on just one set of your double balloons.

Step 5: Tie two of the contrasting colors of balloons together, for your centers. Keep in mind, you want your flower centers to show on either side of the full balloon flowers, so you will want two center balloons in a contrasting color.

Step 6: Wrap the double balloon petals around the set of three balloons at the center. Spread out the balloons so they lay flat. Now you can see they have formed a flower petals and a complete flower shape.

Step 7: Wrap the contrasting colors of double balloons, for the flower centers, around the five balloon petals once, so there’s one on each side.  Use clear fishing line to hang the flowers or ribbon or baker’s twine works great too.   These look great hanging behind a party table or anywhere at the party!

For more great balloon styling ideas and inspiration, be sure to visit our Pinterest boards and for more balloon ideas, click on the link below –

BALLOON STYLING & PARTY DECORATING TIPS 

Feel free to stop by any of our shops if you need PARTY DECORATIONS or PINWHEELS to coordinate to your daisy flower balloons!

 THE PARTY FETTI SHOP

PINWHEEL PRETTIES

READY SET CRAFT KITS

ONCE UPON A HOME DESIGNS

I DO WEDDING & BRIDAL DESIGNS

Jill Signature