Easy & Fast Easter Garland Tutorial

EASTER RIBBON GARLAND TUTORIAL

Decorate your Easter celebration or your next party or event with a cheerful,  easy and fast ribbon garland to match your theme.  It will only take you about 20 to 30 minutes at the most to cut all your ribbon and tie them up since minimal assembly is needed, this garland is made from simple loop knots — no glue or sewing needed!  Let’s get started-

Here’s What You’ll Need:

– Twine or Jute String (length depends on how long you want your garland)

30-35 ft. of Ribbon (different designs/several rolls)

– Scissors

How to Step-by-Step Directions:

Step 1. – Measure a strand of twine to the desired length of your garland.

Step 2. – Cut each piece of ribbon to measure 16-20″ depending on your desired length. Use different color ribbons to match the décor of your event or space.

Step 3. – Fold each piece of ribbon in half, lay it around the twine, and pull the cut strands through the loop to create a loose knot (see image #1 and #2).

Step 4.- Repeat step three for all remaining ribbons, alternating colors to create a pattern (see image #3).

Step 5. – Once all ribbons are tied, trim the ends if needed with scissors. Hang the garland to decorate a party table or kid’s room!

You can even keep this garland and reuse it for future parties or room décor.   If you make one in plain pastel colors with no Easter text printed on your ribbon, these would look stunning in a nursery, hanging across the front of a baby’s crib or in a little girls room hanging across her bed headboard. If you want to get your home ready for spring or need some favor boxes, a banner or anything for your Easter celebration- stop by any of my shops by clicking the links below.

The last day to order with first class shipping for receipt by Easter is Wednesday, April 5th and with priority shipping the last day to order is next Tuesday, April 11th.

PINWHEEL PRETTIES

 THE PARTY FETTI SHOP

ONCE UPON A HOME DESIGNS

READY SET CRAFT KITS

I DO WEDDING & BRIDAL DESIGNS

signature

10 Easy & Cheap Party Table Backgrounds

10 DIY EASY & CHEAP TABLE BACKDROPS

Today I am excited to share the easiest party table backdrop you can create- even if you have no crafty skills.  Plus, its CHEAP!  Who does not love cheap and stunning?  If you can open a package of paper plates and roll out some tape- you can do this! Literally, that is all you need- plates and tape.  No need for instructions here, I think you will get the gist of how to put these backgrounds together, simply from the photos. So, here are ten amazingly easy paper plate backgrounds to install at your next party-

Let’s start with super easy!  These two backdrops above only required a few plates.  They kept it simple by arranging them randomly and spreading them out on the wall. I love the simplicity of this party backdrop but also how fast it would be to put up.

Next up are easy rows of square plates – start with your lowest row, just above your table first, and line them up in perfect rows above. Bam! Simple and fast. Use all the same color or mix it up with alternating colors of square plates.

Same concept as with the square plates, but instead, use round plates.  This one above has overlapped each silver plate slightly to give it a more scalloped and 3D appearance. I could so see this in green and blue for a Little Mermaid themed party- doesn’t that remind you of ocean waves and mermaid scales?! It’s whatever your theme is- go with it!

This white plate background really makes a statement and the use of different alternating colors of paper behind it (use small 8″ x 8″ squares of paper) or you could buy a cheap large vinyl polka dot tablecloth and simply cover the large dots with plates to get the same backdrop of multi colors behind your plates. Plus you won’t have to peel tape off your wall- just tape your plates to the tablecloth and toss it when the party is over!

I’ll leave you with some sunshine.  This one took a bit longer as each plate has been fringed around the edges.  Yes, this can be done easily with fringe scissors. . . you can actually buy these fancy scissors at a local craft store.  They are amazing and you can diy so many other creative party decorations with them.  The added paper plate banner on the front of the table really pulls this whole setup together for a cheerful summer party!

So, what are you waiting for- go get some bright paper plates and design your own party table backdrop!

And if you need additional party decorations, stop by any of my Etsy shops below by clicking on the links-

 THE PARTY FETTI SHOP

PINWHEEL PRETTIES

READY SET CRAFT KITS

ONCE UPON A HOME DESIGNS

I DO WEDDING & BRIDAL DESIGNS

signature

How To Create A Party Backdrop

HOW TO CREATE A PARTY BACKDROP WITH PINWHEELS & PAPER FANS

Today I am going to show you three easy ways to create a party table backdrop using paper or tissue hanging fans or what many like to call “pinwheels”. . . which I will correctly define right now-

These spinning fun designs above are actually PINWHEELS

And these circular paper or tissue designs are actually HANGING FANS

I just had to clear that up. . . whatever you call them is fine but the one question I am asked often is what do you do with them or how do you display paper and tissue fans at a party? Today I am going to offer some instruction and inspire you to create a party table background or a photo backdrop with your hanging fans.

Oh look- here are some pinwheels and hanging fans displayed together!

While there are plenty of DIY tutorials on how to make these hanging fans –

There is not much available instruction on social media explaining how to actually get them on the wall to display.

There are a few different ways to put them up that are super easy.  So grab a cup of coffee- or tea – or wine and let’s get started!

The easiest way to display them is to simply hang them- they are technically called, “hanging fans” so this is the most common way to display them. You can hang them directly from the ceiling or you can use a curtain rod or tension rod to hang them.  Generally just using tacks and pinning them to the wall is easiest way to get them stationary on the wall- if you don’t need them floating out from the wall.   However, if you prefer not to add holes directly to your wall you can use the Command pee-able strips.  If using the Command strips, your fans will probably not be reusable though, as they will most likely be damaged and ripped when you pull them off the wall- so keep that in mind.   I prefer the method shown below of using a freestanding background board.

There are lots of different materials to use- if you are only doing a very small area, a large cardboard or white foam board backing would be okay, as long as you are not adding too many fans like this one below-

When using some type of board backing, weather it be wood, a sheet of drywall, or foam board- it is the easiest way to put your display together because you can actually assemble it on a table or floor.  You can either use sewing pins or flat tacks if using cardboard or foam board but if you are using wood or a heavier material, you’ll need to use a glue gun and hot glue your fans.  See how this larger wood backed fan display was all laid out on the floor and all the fans were hot glued down before putting it up-

And here it is installed-

I definitely recommend a heavy wood or drywall board if you are creating a large display background like this or your are going to layer it with many fans.

However, if your area is small enough, you can also use a large picture frame

You can see the corners of the black picture frame in the set up above.   You can even go to your local thrift store and buy the largest picture or painting, no mater how ugly it is, as long as it is large and framed and just cover it with fabric by wrapping it around the front and stapling the fabric to the back or spray paint the whole thing one color- pick a color that matches your dominate color of fans. If it has glass- you can either paint right over the glass, with a glass paint or remove the glass and replace it with cardboard or foam board- and foam board comes in an array of colors, so you could go with a color that matches your party color scheme.

This is another way to display fans- add them to long wood stick stands or floor poles, shown here in this jewelry company promotional product display, and simply stand your fans up behind or on the back of your party table-

So there you have it- the how to on getting your fans up and displayed at your next party!

If you are not into making your own hanging fans or need me to help you with a party backdrop, feel free to browse all my shops by clicking the links below-

Thanks for stopping by today!